2021 Good Quality China Centrifugal Pump - Sanitary stainless steel pneumatic diaphragm pump – Qiangzhong Detail:
Sanitary Pneumatic Diaphragm Pump
Used in various special occasions to meet the needs of different users.It is used to pump media that cannot be pumped by conventional pumps and achieve satisfactory results.
Product Parameters
| Model No. |
Flow (T/h) |
Dia. (mm) |
Lift (m) |
Suction (m) |
Pressure Air Consumption Partical Dia. |
weight (kg) |
||
|
(mpa) |
(scfm) |
(mm) | ||||||
| QBSY5-20 | 0.1-1.8 |
20 |
0-50 |
4.5 |
0.6 |
12.7 |
2.5 |
10 |
| QBSY5-25 | 0.1-1.8 | 25 | 0-50 |
4.5 |
0.6 |
12.7 |
2.5 |
10 |
| QBSY5-32 | 0.1-6 | 32 | 0-50 |
4.5 |
0.7 |
23.66 |
3.2 |
16.8 |
| QBSY5-38 | 0.1-6 | 38 | 0-50 |
4.5 |
0.7 |
23.66 |
3.2 |
16.8 |
| QBSY5-51 | 0.1-12 | 51 | 0-50 | 5.48 |
0.75 |
32 |
5.5 |
33 |
| QBSY5-63 | 0.1-12 | 63 | 0-50 | 5.48 |
0.75 |
12.7 |
5.5 |
33 |
| QBSY5-76 | 0.1-22 |
76 |
0-50 | 5.48 |
0.75 |
12.7 |
6.3 |
54 |
| QBSY5-89 | 0.1-22 |
89 |
0-50 | 5.48 |
0.75 |
12.7 |
6.3 |
54 |
| 1. B Type Clamp | 11. Connecting Rod Shaft | 21. BType Seal | 31. Large Slider Aluminum Parts |
| 2. Column | 12. Rows | 22. V-Ring | 32. V Ring |
| 3. Left Foot | 13. Gas Valve Chamber Gasket | 23. Protective Cover | 33. Small Slider |
| 4. Right Foot | 14. Quick Loading | 24. Guide Block Gasket | 34. Boosting Rod |
| 5. Plywood Screws | 15. A Type Clamp | 25. Guide Block | 35. Boosting Rod O-Ring |
| 6. Splint O-Ring | 16. Inlet And Outlet Pipe | 26. Large Slide Plastic Parts | 36. Actuating Rod Cover |
| 7. Outer Splint | 17. A Type Sealing Ring | 27. Large Slider O-Ring | 37. Valve Chamber |
| 8. PTFE Membrane | 18. Ball Valve | 28. Pistons | 38. Piston Sleeve |
| 9. Poly Film | 19. Ball Valve | 29. Gas Valve Cover Gasket | 39. Silencer |
| 10. Inner Splint | 20. Ball Seat Cover | 30. Valve Cover | 40. Connecting Rod Sleeve |
Working Principle
Pneumatic diaphragm pump is a volumetric pump that brings volume change by reciprocating deformation of the diaphragm. Its working principle is similar to the plunger pump. Diaphragm pumps have the following features:
I -The pump will not be overheated: With compressed air as power, the exhaust is a process of expanding and absorbing heat, so during operation, the temperature of the pump itself is reduced and no harmful gas is discharged.
2-No spark generation: Pneumatic diaphragm pumps do not use electric power as a power source and can prevent electrostatic sparks after they are grounded.
3.lt can pass through the liquid containing particles: Because it uses a volumetric working method and the inlet is a ball valve, not easy to be blocked.
4. The shearing force is extremely low: the material is discharged in the same state as it is sucked in when the pump is at work, so the agitation of the material is minimal and it is suitable for conveying unstable substances.
5. Adjustable flow rate: A throttling valve can be installed at the material outlet to regulate the flow.
6.Self-priming function.
7.It can be idling without danger.
8.lt can work in diving.
9. The range of fluids that can be delivered is extremely wide ranging from low viscosity to high viscosity, from corrosive to viscous.
10. The control system is simple and uncomplicated, without cables, fuses, etc.
II .Small size, light weight, easy to move.
12.Lubrication is not required, so maintenance is simple and it does not cause contamination of the working environment due to dripping.
13.lt can always be efficient, and it will not reduce work efficiency due to wear.
14.100% energy utilization. When the outlet is closed, the pump stops automatically to prevent equipment movement, wear, overload, and heat generation.
15.There is no dynamic seal, maintenance is simple, leakage is avoided, and there is no dead point when working.
Product detail pictures:
Related Product Guide:
Cooperation
We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for 2021 Good Quality China Centrifugal Pump - Sanitary stainless steel pneumatic diaphragm pump – Qiangzhong, The product will supply to all over the world, such as: America, Georgia, United Arab Emirates, We take measure at any price to attain essentially the most up-to-date gear and procedures. The packing of nominated brand is our a further distinguishing feature. The solutions to assure years of trouble-free service has attracted a great deal customers. The goods are obtainable in improved designs and richer variety, they're produced scientifically of purely raw supplies. It accessible in a variety of designs and specifications for the selection. The newest forms are much far better than the previous one and they're extremely popular with several clients.
By Genevieve from French - 2015.12.25 12:43
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Kelly from Czech - 2016.09.09 10:18
-
Manufacturer of Subway Handrail Tube - JM-L Ve...
-
Factory wholesale Sugarcane Juice Filter - Mul...
-
Hot New Products Low Pressure Manhole Oval Cove...
-
Manufactur standard Machine Make Cheese - Shea...
-
2021 wholesale price Industrial Mixer Tank - S...
-
Original Factory Shampoo Homogenizer - Propell...