Mixing Tank + Screw Pump
It is used to stir, mix, blend, and homogenize materials. It is made of high-quality stainless steel 304 or 316L, and the structure and configuration can be customized according to requirements.
Product introduction
This equipment meets the requirements of China’s “GMP”; and is designed and manufactured in accordance with China’s JB/4735-1997 standards. This equipment is suitable for pharmaceutical industry, food industry, brewing industry, as well as liquid preparation (product) process and various water treatment processes.
1.The material is made of 316L or 304 stainless steel, the inner surface is polished, and the roughness(Ra) is less than 0.4pm.
2. The mixing method includes top mechanical mixing and bottom mixing:
♦The optional top mixer paddle types include: propeller, screw, anchor, scraping or paddle, that can fully mix the materials evenly.
♦The optional bottom mixer types include: magnetic stirrer, propeller stirrer, and bottom-mounted homogenizer, used to accelerate the dissolution and emulsification of materials. ♦The mixing speed type can be fixed speed or variable speed controlled by the frequency converter, so as to avoid too much foam due to excessive speed.
♦Stainless steel electric control cabinet can comprehensively monitor the operation of equipment, and can display data such as temperature and stirring speed.
3.Optional configurations are: air breathing apparatus, thermometer, steam sterilization port, sanitary inlet, liquid level gauge and liquid level automatic control system, universal rotating CIP cleaning ball, etc.
4. Optional Jacket types include coiled tube, full jacket, and honeycomb jacket.
5. The insulation could be rock wool, polyurethane foam, or pearl cotton. The shell is polished, brushed or matted, at the customer’s choice
6. Capacity: 30L-30000L.
PRODUCT PARAMETERS
Technical file support: random provide equipment drawings (CAD), the installation drawing, the product quality certificate, installation and operating instructions, etc.
|
Capacity (L) |
Motor Power (kw) |
Nominal Diameter (mm) |
Mixer Speed (r/min) |
|
100 |
0.75 |
500 |
|
|
200 |
0.75 |
600 | |
|
500 |
0.75 |
800 |
24-120 RPM |
|
1000 |
1.5 |
1000 |
(RPM range |
|
1500 |
1.5 |
1200 |
of optional) |
|
2000 |
1.5 |
1200 |
|
|
2500 |
2.2 |
1400 |
* the above table is for reference only, can customize according to customer’s requirements.
* this equipment can customize according to customer’s material, need to comply with process, such as meet high viscosity, homogeneous function strengthen, heat-sensitive materials such as requirements.
PRODUCT STRUCTURE
The mixing tank is composed of the mixing tank body, upper and lower ends, agitator, feet, transmission devices, shaft sealing devices, etc., and heating or cooling devices can be added as needed.
According to different process requirements, stainless steel or carbon steel can be used for tank body, tank cover, agitator and shaft seal.
The tank body and the tank cover can be connected by flange sealing or welding. Different holes can be opened on the tank body and tank cover for feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, safe venting, etc.
A transmission device (motor or reducer) is installed on the tank cover to drive the agitator in the mixing tank.
The shaft sealing device is optional from mechanical seal, packing seal and labyrinth seal. According to different needs, the agitator could be paddle type, anchor type, frame type, screw type, etc. If you have any other customization requirements, please confirm with us.
