OEM/ODM Manufacturer Rotor Lobe Pump - Sanitary stainless steel pneumatic diaphragm pump – Qiangzhong

Short Description:

Product Detail

Product Tags

Feedback (2)

To get the stage of realizing dreams of our employees! To build a happier, more united and much more skilled crew! To reach a mutual benefit of our prospects, suppliers, the society and ourselves for Stainless Steel Subway Handrail Tube/Rod, Flange open mobile storage tank Buffer tank Temporary storage tank, Sanitary Round Tube Clamp, Are you still looking for a quality product that is in accordance with your good company image while expanding your product range? Try our quality products. Your choice will prove to be intelligent!

OEM/ODM Manufacturer Rotor Lobe Pump - Sanitary stainless steel pneumatic diaphragm pump – Qiangzhong Detail:

Sanitary Pneumatic Diaphragm Pump

Used in various special occasions to meet the needs of different users.It is used to pump media that cannot be pumped by conventional pumps and achieve satisfactory results.

Product Parameters

Model No.	Flow (T/h)	Dia. (mm)	Lift (m)	Suction (m)	Pressure Air Consumption Partical Dia.			weight (kg)
Model No.	Flow (T/h)	Dia. (mm)	Lift (m)	Suction (m)	(mpa)	(scfm)	(mm)	weight (kg)
QBSY5-20	0.1-1.8	20	0-50	4.5	0.6	12.7	2.5	10
QBSY5-25	0.1-1.8	25	0-50	4.5	0.6	12.7	2.5	10
QBSY5-32	0.1-6	32	0-50	4.5	0.7	23.66	3.2	16.8
QBSY5-38	0.1-6	38	0-50	4.5	0.7	23.66	3.2	16.8
QBSY5-51	0.1-12	51	0-50	5.48	0.75	32	5.5	33
QBSY5-63	0.1-12	63	0-50	5.48	0.75	12.7	5.5	33
QBSY5-76	0.1-22	76	0-50	5.48	0.75	12.7	6.3	54
QBSY5-89	0.1-22	89	0-50	5.48	0.75	12.7	6.3	54

1. B Type Clamp	11. Connecting Rod Shaft	21. BType Seal	31. Large Slider Aluminum Parts
2. Column	12. Rows	22. V-Ring	32. V Ring
3. Left Foot	13. Gas Valve Chamber Gasket	23. Protective Cover	33. Small Slider
4. Right Foot	14. Quick Loading	24. Guide Block Gasket	34. Boosting Rod
5. Plywood Screws	15. A Type Clamp	25. Guide Block	35. Boosting Rod O-Ring
6. Splint O-Ring	16. Inlet And Outlet Pipe	26. Large Slide Plastic Parts	36. Actuating Rod Cover
7. Outer Splint	17. A Type Sealing Ring	27. Large Slider O-Ring	37. Valve Chamber
8. PTFE Membrane	18. Ball Valve	28. Pistons	38. Piston Sleeve
9. Poly Film	19. Ball Valve	29. Gas Valve Cover Gasket	39. Silencer
10. Inner Splint	20. Ball Seat Cover	30. Valve Cover	40. Connecting Rod Sleeve

Working Principle

Pneumatic diaphragm pump is a volumetric pump that brings volume change by reciprocating deformation of the diaphragm. Its working principle is similar to the plunger pump. Diaphragm pumps have the following features:

I -The pump will not be overheated: With compressed air as power, the exhaust is a process of expanding and absorbing heat, so during operation, the temperature of the pump itself is reduced and no harmful gas is discharged.

2-No spark generation: Pneumatic diaphragm pumps do not use electric power as a power source and can prevent electrostatic sparks after they are grounded.

3.lt can pass through the liquid containing particles: Because it uses a volumetric working method and the inlet is a ball valve, not easy to be blocked.

4. The shearing force is extremely low: the material is discharged in the same state as it is sucked in when the pump is at work, so the agitation of the material is minimal and it is suitable for conveying unstable substances.

5. Adjustable flow rate: A throttling valve can be installed at the material outlet to regulate the flow.

6.Self-priming function.

7.It can be idling without danger.

8.lt can work in diving.

9. The range of fluids that can be delivered is extremely wide ranging from low viscosity to high viscosity, from corrosive to viscous.

10. The control system is simple and uncomplicated, without cables, fuses, etc.

II .Small size, light weight, easy to move.

12.Lubrication is not required, so maintenance is simple and it does not cause contamination of the working environment due to dripping.

13.lt can always be efficient, and it will not reduce work efficiency due to wear.

14.100% energy utilization. When the outlet is closed, the pump stops automatically to prevent equipment movement, wear, overload, and heat generation.

15.There is no dynamic seal, maintenance is simple, leakage is avoided, and there is no dead point when working.

Product detail pictures:

Related Product Guide:
Cooperation

That has a sound business credit history, outstanding after-sales service and modern producing facilities, we have earned an superb popularity amid our buyers across the planet for OEM/ODM Manufacturer Rotor Lobe Pump - Sanitary stainless steel pneumatic diaphragm pump – Qiangzhong, The product will supply to all over the world, such as: Hungary, Pakistan, Serbia, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

Automatic Self-Priming Water Pump